Rear of a Cumberland, RI home with new VELUX skylights added to the existing roof

VELUX Skylight Installation in Cumberland, RI

Not every skylight project starts with a new roof. Plenty of homeowners here have shingles with years of life left and simply want a darker room brightened, whether that is a family room addition off a colonial near Diamond Hill or a kitchen in a ranch near the Blackstone River. For them, the job is adding a skylight to the roof that is already there.

Adding Light to a Roof That Stays

That is what happened on a recent project in town, where VELUX skylights were added to an existing roof. The key is treating the flashing exactly as carefully as on a brand-new roof, working the VELUX flashing kit and underlayment in under and around the surrounding shingles so water sheds over everything. The project write-up shows the finished skylights.

Project Photo Gallery

Good To Know: Does adding a skylight weaken the roof framing?

Not when the opening is framed properly. Where rafters are cut to make room for a skylight, new headers and side framing carry the load around the opening. Many skylights are sized to fit between existing rafters, which keeps framing changes small. We look at the rafters from the attic before recommending a size or spot.

When Adding to the Existing Roof Makes Sense

It usually makes sense when the roof is in good shape and you want light now. If your shingles are near the end of their life, adding skylights during a roof replacement is cleaner, since everything goes in fresh. We will tell you honestly which fits your house. Either way, every skylight gets the matching flashing kit; VELUX ties its 10-year installation warranty to it. See the VELUX warranty page for full terms.

Choosing the Skylight

You decide what you want: which room, how much light, whether it opens, whether it needs a shade. We then check the framing and ceiling and help you narrow down a fixed skylight, a Fresh Air skylight that opens, or a Sun Tunnel for a small bath or hall where a full light shaft will not fit. Already have old skylights? Our replacement page explains swapping them out.

Our Team

Skylights of Rhode Island is Rhode Island’s only VELUX Signature Skylight Specialist. Every install uses VELUX parts and VELUX instructions, and you can browse the full product line on veluxusa.com.

Cumberland, RI

From Diamond Hill and the land around the Monastery to Valley Falls, Cumberland Hill and the neighborhoods near the Blackstone River Bikeway, Cumberland runs from busy village streets to quiet wooded lots in the north. Its homes range from mill-era houses to newer colonials, and plenty of them have one room that could use light from above.

Want to add a skylight to your Cumberland roof? Book your free skylight visit or call 401-329-2840.

Frequently Asked Questions

Can you add a skylight to my Cumberland roof without replacing it?

Usually, yes, if the shingles are in good condition. The VELUX flashing kit is worked in under the surrounding shingles so water sheds over it, just as on a new roof. If the roof is near the end of its life, we will suggest doing the skylight with the replacement instead.

How do you know where a skylight can go in a Cumberland house?

We start with where you want the light, then check the rafters from the attic, the ceiling below and anything in the way, like wiring, vents or plumbing. Many skylights fit between existing rafters. If your spot needs framing changes, we explain them before you decide.

What does adding a skylight cost in Cumberland?

It depends on the type, size, whether it opens or has a shade, the roof pitch and the length of the light shaft to your ceiling. Working into an existing roof adds some shingle work around the opening. We give a free written quote with the exact VELUX model.